YG Heat 2KZ
YG Heat 2KZ - Wiring
The YG Heat 2KZ Yellow Grid is connected to a fixed electrical outlet of the electric boiler.
The connection must be performed by a qualified electrician.
The device can connect to the Internet via Ethernet (RJ45) or Wi-Fi.
Setup can be performed using the Yellow Grid app or the Yellow Grid Cloud.
A temperature sensor is included in the package.
YG Heat 2KZ - Technical data
Product Description:
Flat-housing device designed to be mounted near the electric boiler. It can switch the output on/off and display the measured values (A, V, W, kWh).
An external temperature sensor can be connected via DI (Digital Input).
The device can be controlled via the Yellow Grid mobile app or the Yellow Grid Cloud.
ZCS (Zero Current Switching): The relay switches when the current crosses the zero level. This reduces relay wear and allows switching of devices with a high inrush current.
A temperature sensor is included in the package.
Power:
Terminal block (Ø 2.5 mm), 230 V
Output: On/Off (relay SPST-NO, IOC)
Max current: 16 A
Internal consumption: 1-2 W
Interface:
LAN 10/100 Mbps (RJ45)
WiFi: 802.11 b/g/n; 2.4 GHz
2x DI (Digital Input), 12 V (100 mA)
Electrical measurement:
current (A), voltage (V), power (W), and energy (kWh).
Dimensions and Weight:
Device: 102 × 32 × 149 mm
Package: 125 × 73 × 204 mm / 0.2 kg
YG Heat 2KZ is supplied without power cables.
Operating conditions:
Temperature: -20 °C to +55 °C
For indoor use only (IP30)
Standards:
EN 62368, EN 60950, EN61000, EN50581
Designed and made in the Czech Republic